It’s a community-based project which helps to repair anything. Please refer to the readme files, if available, for the latest information. The following fields will appear. Mic-in Jack J6 – Pink Connect a microphone to the mic-in jack. If a mouse is not connected to this port, the system will reserve IRQ12 for other expansion cards.
|Date Added:||7 April 2009|
|File Size:||21.59 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
One code indicates that a video error has occured and the BIOS cannot initialize the video screen to display any additional information.
The fan will provide adequate airflow throughout the chassis to prevent overheating the processor. Save on Motherboards Trending price is based on prices over last 90 days.
Dfi CMTL Manuals
The screen will also display the auto-detected information. Check that one end of the AC power cord is plugged into a live outlet and the other end properly plugged into the back of the system.
The default value is Disabled.
Set this field to Disabled if you are not using this function. Try replacing it with a new fan. HDD Power Down After the set time of system inactivity, the hard disk drive will be powered down while all other devices c33 active.
The larger the range of the Cache RAM, the higher the efficiency of the system. It is also equipped with a switching voltage regulator that automatically detects 1.
DFI CM33-TL Socket 370 Micro-ATX Motherboard
If this function is not supported, you need to download the appropriate driver from their respective website. Socket Computer Motherboards. Push and release again in less than 4 sec to restore.
Connect the CPU fan to the 3-pin fan connector at location J18 on the system board. Danger of explosion if battery incorrectly replaced. After the memor y test, the following message will appear on the screen: It will then recreate a new set of configuration data.
DFI CM33-TL – motherboard – micro ATX – Socket 370 – PLE133T
Set JP3 pins 2 and 3 to On. Gently press each component into the socket. The CPU fan did not rotate immediately or it took some time before the fan rotated. Connect an analog joystick to the pin D-sub connector J10 – Gold located at the ATX double deck ports of the system board. Reset Switch This switch allows you lt reboot without having to power off the system thus prolonging the life of the power supply or vm33.
Function and Fm33 Temp. Free MP3 of the Day Argy can move a dance floor of sweaty bodies with house music without resorting to the hands-in-the-air syncopated beats that often have wailing house divas behind them.
Capacity Displays the approximate capacity of the disk drive. Make sure the colored stripe on the ribbon cable is aligned with pin 1 of connector J The only problems were 1. The colored edge of the ribbon should be aligned with pin 1 of J DFI Warranty provided by: If your monitor ccm33 such a switch, set it for analog. Hard Disk s fail 20 HDD initialization error.