Therefore the length of the incident light reflected from the document to the CCD sensor is kept constant. I have the disc and have uninstalled and re installed the program Yes Does the lamp light normally? I have a Linotype Saphir Ultra2, it was probably also sold by Umax. I started my company with a Genius scanner with Win 3.

Uploader: Faelkree
Date Added: 14 June 2007
File Size: 56.40 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3324
Price: Free* [*Free Regsitration Required]

Some people apparently scan their slides at dpi and are gy with that! For more information on how Epson treats your personal data, please read our Privacy Information Statement.

Basically, the same way it works with any other SCSI.

Remove 9 elson and remove the glass frame assembly. Then remove the inverter board. Failure in this operation will cause the CR to start scanning at a wrong position. With this system, the voltage is rectified by the diode bridge DB1 and then smoothed by the serial smoothing capacitors C11 and C32 to produce approximately VDC.

Now I have to find an 50 Centronics – 50 standard S.


Then remove the lamp from the carriage. I’ve clicked manualy on the device and it’s saying that it’s missing something. What can I do.

I know–more than you wanted to hear. Engaging the timing belt with the pinion gear of the motor, install the motor to the frame with 2 screws No. Reversal film, Negative film Note: Be sure to follow the instruction provided in the next page to paallel the timing belt peoperly.

It is looking for a SCSI hard drive. And also fourteneley is good that I asked Remove 2 screws No. The instructions and procedures included parallell are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding page. It flickers during scanning due to data transmission between the host computer and the scanner.

TTL compatible level n Connector: IOW, the possible 8-bit values are not equidistant. For focusing function, it moves toward the optic with the drive sent from the motor. You may remember that DoF in cameras is tied to focal length and aperture, and scanners are no different. Category Auxiliary Table Posted on Jan 23, Ever heard of a “gamma curve”?


It will work fine with an “Adaptec” S. Epson’s “dual focus” models have two selectable focal points, one at about 1 mm above the scanner glass for reflective targets and the other at about 3 mm for transparencies.

Epson GT 12000 – flatbed scanner Series

Disconnect the connector cable for the lamp from the connector CN2 on the inverter board assembly. I’ve also got a long-bed Artec scanner that’s even earlier than yours and it produces very nice monochrome color is nothing to parqllel home about output.

I do have believe it or not some old scans I made from an art book inon diskette. But the big kicker is that they can be slower.

Epson and Other Scanner Matters

Helpful 0 Not Helpful Comment Flag. Epson GT Flatbed Scanner. Instant Repair Help over the Phone 6ya.