Select and execute the functions by the adjustment program. Not too hot to touch? No paper on the paper path. Not necessary Carriage Lock position. The carriage moves to the digit side slowly and confirms that the Red: Bi-D adjustment Pattern Printing [Judgment method] Find the pattern with no gaps or overleaps of the left and right pattern, and enter the value of that pattern.

Uploader: Brami
Date Added: 2 December 2007
File Size: 27.70 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 40586
Price: Free* [*Free Regsitration Required]

Paper Width and Length Table Ink cartridge s is not installed. If the waste ink counter is closed to its limit, recommend that the Waste drain ink pad will be replaced with new one.

Epson Me30 printer

Image Mme30 Type C. Do not use double envelopes and cellophane window envelopes. Due to this, when the waste ink max counter has reached the limit of the absorbing capability of the Waste drain ink pad, the Maintenance call error is indicated on Status monitor 3 as following figure. Removing Epsonn Supply Board 3 Figure The carriage moves to the digit side slowly and confirms it Patterns are printed as shown below.


Epson ME 30 Manuals

Removing Holder Board Assy Figure Lubrication on Main Frame D other parts. The assy is likely to be installed in the wrong position. Tab 2 Holder Board Assy Figure Place the Cap Assy and match the tabs x2 and lock them. Insert the blade between the ribs. CR lock lever and clutch mechanism play an important role in paper loading mechanism. The carriage moves to the 0-digit side slowly to leave from the CR lock.

High Quality Epson Me30, Wholesale & Suppliers – Alibaba

When the LD roller is turned a full circle, the CR lock lever release the clutch and the drive to the LD roller is interfered. If the exterior parts are stained by the ink, use a ke30 moistened with neutral detergent to wipe it off.

The carriage slowly returns to its home position. Peel off the acetate tape and remove the grounding spring 1,2. We do not have a self collection point at the moment.


Show All Item Images

Retard roller Papers are fed from the backside and ejected from the front side of the printer. Removing PF Motor 1 2.

Remove the Main Board p40 2. If there is any, remove them. The coating is fragile and can be mw30 damaged. Detach the ferrite core from the Main Frame.

Star wheel rollers 2. The empty sanction operation may occur depending on the situation. Remove the screw from the Shield Plate L.

The spring is different in shape from that of other models. Do not miss it again!

Then, components of the printer. Detach the Cap Assy. Checked Does it move smoothly?